# Brand new AD/LDAP install

**URL:** <https://community.auth0.com/t/brand-new-ad-ldap-install/195732>\
**Category:** Get Help\
**Tags:** configuration, application\
**Created:** [December 23, 2025, 5:05pm UTC](https://community.auth0.com/t/brand-new-ad-ldap-install/195732 "2025-12-23T17:05:44Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![jared.stoker](https://sea1.discourse-cdn.com/auth0/user_avatar/community.auth0.com/jared.stoker/32/71057_2.png) [@jared.stoker](https://community.auth0.com/u/jared.stoker)\
**Post date:** [December 23, 2025, 5:05pm UTC](https://community.auth0.com/t/brand-new-ad-ldap-install/195732/1 "2025-12-23T17:05:44Z")

</div>

I have a brand new installation of an AD/LDAP connector. Install is correct and up to date. It is installed directly on my AD server for an easier test run. I’m unable to setup the initial configuration. The error comes up as “No thumbprints available in the connection information. Cannot compare certificates.”

In searching for topics on this error I only find solutions for other connector types. I don’t seem to be able to find one specific to my issue. I know I’m likely missing a certificate somewhere but I can’t seem to find where to put it from the documentation. I could definitely use some help!

---

<div class="post-metadata">

**Author:** ![gerald.czifra](https://sea1.discourse-cdn.com/auth0/user_avatar/community.auth0.com/gerald.czifra/32/75301_2.png) [@gerald.czifra](https://community.auth0.com/u/gerald.czifra)\
**Post date:** [December 24, 2025, 4:27pm UTC](https://community.auth0.com/t/brand-new-ad-ldap-install/195732/3 "2025-12-24T16:27:19Z")

</div>

Hi @jared.stoker

Welcome to the Auth0 Community!

The error that you are facing usually indicates an issue during the initial handshake between the AD Connector and Auth0. In this time, the Auth0 dashboard is expecting security certificate thumbprint in order to validate the connector’s identity and a couple causes can lead to the error that you are seeing:

- mismatch of the self-signed certificate;
- missing metadata within the certificate;
- network or firewall blockage, which could prevent the connector from reaching Auth0;
- lack of permissions for the AD Connector.

I would recommend looking through the following documentations that could help solve the issue that you are facing, hopefully it is a simple settings that needs to be fixed:

- [Troubleshoot AD/LDAP Connector](https://auth0.com/docs/troubleshoot/integration-extensibility-issues/troubleshoot-ad-ldap-connector);
- [Connect Your App to Active Directory using LDAP](https://auth0.com/docs/authenticate/identity-providers/enterprise-identity-providers/active-directory-ldap);
- [AD/LDAP Connector Configuration File Schema](https://auth0.com/docs/authenticate/identity-providers/enterprise-identity-providers/active-directory-ldap/ad-ldap-connector/ad-ldap-connector-config-file-schema)

Hope this helped!  
Gerald

---

<div class="post-metadata">

**Author:** ![jared.stoker](https://sea1.discourse-cdn.com/auth0/user_avatar/community.auth0.com/jared.stoker/32/71057_2.png) [@jared.stoker](https://community.auth0.com/u/jared.stoker)\
**Post date:** [December 24, 2025, 6:50pm UTC](https://community.auth0.com/t/brand-new-ad-ldap-install/195732/4 "2025-12-24T18:50:11Z")

</div>

Yes, I have looked through that documentation. Doesn’t seem to apply to the error I’m facing.

---

<div class="post-metadata">

**Author:** ![jared.stoker](https://sea1.discourse-cdn.com/auth0/user_avatar/community.auth0.com/jared.stoker/32/71057_2.png) [@jared.stoker](https://community.auth0.com/u/jared.stoker)\
**Post date:** [December 29, 2025, 3:15pm UTC](https://community.auth0.com/t/brand-new-ad-ldap-install/195732/5 "2025-12-29T15:15:35Z")

</div>

My colleague fixed my issue in about 2 minutes. It needed to be an ‘ldaps’ in the connection. Windows doesn’t allow a cleartext connection by default.

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/auth0/original/3X/b/5/b560f266932fcce5d57f09a6595bd50518cae3f3.jpeg) [@system](https://community.auth0.com/u/system)\
**Post date:** [January 12, 2026, 3:16pm UTC](https://community.auth0.com/t/brand-new-ad-ldap-install/195732/6 "2026-01-12T15:16:27Z")

</div>

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.
