# Addition of Delay Functionality for Authentication Responses when IP Throttling is Active

**URL:** <https://community.auth0.com/t/addition-of-delay-functionality-for-authentication-responses-when-ip-throttling-is-active/170035>\
**Category:** Product Feedback\
**Tags:** authentication, login, auth0\
**Created:** [January 24, 2025, 1:50am UTC](https://community.auth0.com/t/addition-of-delay-functionality-for-authentication-responses-when-ip-throttling-is-active/170035 "2025-01-24T01:50:33Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![fujii.takayuki](https://sea1.discourse-cdn.com/auth0/user_avatar/community.auth0.com/fujii.takayuki/32/57153_2.png) [@fujii.takayuki](https://community.auth0.com/u/fujii.takayuki)\
**Post date:** [January 24, 2025, 1:50am UTC](https://community.auth0.com/t/addition-of-delay-functionality-for-authentication-responses-when-ip-throttling-is-active/170035/1 "2025-01-24T01:50:33Z")

</div>

### **Content**

To comply with the security requirements of “JC-STAR,” it is necessary to implement a functionality that can introduce a delay when issuing authentication responses.

Currently, the settings in Auth0 are as follows:

- **Suspicious IP Throttling** : Enabled
- **Suspicious IP Thresholds** : Default

Under these conditions, there is no functionality in Auth0 to introduce delays in authentication responses. Therefore, I would like to request the addition of the following features:

1. The ability to configure a delay time when issuing authentication responses.
2. The ability to control delay time dynamically, especially after failed authentication attempts.  
(For example, allowing a delay time such as XXms to be specified.)

The addition of these features would greatly help in meeting the requirements of JC-STAR compliance. I would greatly appreciate it if you could consider implementing these improvements.

* * *

### **Additional Information**

Through previous communication, I have confirmed that no such functionality currently exists in Auth0.  
The goal is to achieve stricter control over IP throttling and to meet specific security requirements.

---

<div class="post-metadata">

**Author:** ![rueben.tiow](https://sea1.discourse-cdn.com/auth0/user_avatar/community.auth0.com/rueben.tiow/32/11646_2.png) [@rueben.tiow](https://community.auth0.com/u/rueben.tiow)\
**Post date:** [January 28, 2025, 4:59am UTC](https://community.auth0.com/t/addition-of-delay-functionality-for-authentication-responses-when-ip-throttling-is-active/170035/3 "2025-01-28T04:59:33Z")

</div>

Hi @fujii.takayuki,

Thanks for the feedback request!

If you haven’t already, I recommend upvoting this feedback request!

Let’s hope it attracts as many votes as possible!

Thanks,  
Rueben

---

<div class="post-metadata">

**Author:** ![beredis802](https://sea1.discourse-cdn.com/auth0/user_avatar/community.auth0.com/beredis802/32/72124_2.png) [@beredis802](https://community.auth0.com/u/beredis802)\
**Post date:** [January 29, 2025, 4:43pm UTC](https://community.auth0.com/t/addition-of-delay-functionality-for-authentication-responses-when-ip-throttling-is-active/170035/4 "2025-01-29T16:43:03Z")

</div>

Youre absolutely right - Auth0 currently doesnt offer built-in functionality for introdusing delays in authentication responses, even with Suspicious IP Throttling enabled. While this feature would be valuable for meeting JC-STAR compliance, a possible workaround could be implementing a middleware layer in your authentication flow to introduce controlled delays based on failed attempts.
